Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Remake of "CNC Clamp and Tool storage"

110 likes
1347 opens
728 copies
23 comments
Glen Powell

Project by

Glen Powell

General Information

This is an all in one Clamp and Tool storage tray at 18 in x 10 in. It can hold up to 92 cutting tools . The tray is also equipped with a location for your 17 mm wrench and 150 mm caliper set. It will also hold all the hold down screws, clamps, and bases from the Inventables 3D clamp set.

Like this project Open in Easel®
Joshua Morgan
I don't suppose you'd be willing to share this file?
Joshua Morgan
Glen Powell
yes if i did it right it is available now.
Glen Powell
Devrin Heuer
Hi Glen, was wondering if I would be able to use your design? I'm new to the cnc world, and currently rebuilding my shop after a recent fire. I made the first test cut on my xcarve the day of the fire and haven't been able to use it since. With your permission, your design would be the second.
Devrin Heuer
Glen Powell
Devrin, absolutly you can.
Glen Powell
Devrin Heuer
Thank you! I'm looking forward to getting back to learning my CNC. I seem to be having some issues. Easel tells me that your file has not been shared publicly. Not sure if I am missing something when I try to open it.
Devrin Heuer
Glen Powell
i believe its avalable i dont know what the issue is.
Glen Powell
Ricky Odom
Strange, when I try to open the project it still tells me its not public.
Ricky Odom
Glen Powell
Rick i should be available I'm not sure why you cant use it. dumb question, are you loged in to inventables?
Glen Powell
Eli Chester
Was anyone able to open this project? I would love to make this tomorrow but its not opening.
Eli Chester
Glen Powell
Hi everyone, apparently I am not sure why other users are having trouble opening this project, if anyone can tell me why that would be great. I really would like to share it.
Glen Powell
Charlie & Rachael Houston
anyway to just get a copy of the wrench cut out? love the design though
Charlie & Rachael Houston
Devrin Heuer
Hi Glen, wanted to let you know I did manage to get your organizer project saved. Another week or so I should be able to run it. Thank you, Devrin Heuer.
Devrin Heuer
Joseph Merlino
hello, Thank you for sharing your design i was wondering if you would be able to recommend settings and bit type for this cut?
Joseph Merlino
James Ruston
Thanks! This is great.
James Ruston
Ray T Salvador
I love it...where can i find the project link
Ray T Salvador
Travis Mullen
Hi, I realize this is probably old, but what's the red thing in the picture? I'm worried that I'm missing something.
Travis Mullen
Mike DeLong
I'm curious if the dimensions on Inventable's clamps have changed since this project was posted. I just made this as my first project, and so many of the items don't fit in the holes, mostly the clamp parts. I'm going to have to redrill all of the holes a slightly larger diameter...
Mike DeLong
Ramon K Rife Jr
Travis Mullen, my guess is the red thing is a precision collet wrench that has been plastic dipped. The precision collet increases precision and is sold separately.
Ramon K Rife Jr
Ramon K Rife Jr
Mike DeLong, when I carved this file I used the manual cutting speeds set in the project. They seemed a bit aggressive as my router chattered a bit and sounded like it was cutting too much. My holes were a bit small as well so I think slowing the speeds 10-15% may make a better cut.
Ramon K Rife Jr
Bill Bozarth
I made your tray for my X-Carve Tools, came out perfect. I would like to make other trays for other tools. How did you get the tool outlines to put in Easel and how did you get the correct size? They fit very well.
Bill Bozarth
Glen Powell
Bill Bozarth, I credit the tool outlines to Matthew J. Parker Sr. as I used part of his tool paths to create mine.
Glen Powell
Allen Williams
Is the wrench cutout for Dewalt or Milwaukee?
Allen Williams
shannon borglund
What bit and rate did you use?
shannon borglund