Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

WoodRiver Pocketknife (Item 163955)

2 likes
35 opens
5 copies
340 downloads 2 comments
Matthew T Mead

Project by

Matthew T Mead

General Information

Great quick project to make wood sides for this pocketknife using 1/8" hardwood.

Like this project Open in Easel®
Material Description Price
African Mahogany Wood

African Mahogany Wood

6" × 12" × 1/8" African Mahogany

$7.03

$7.03
from Inventables

File Description Unit Price

WoodHandleDesign.svg

SVG for wood handle

$0

Download Zip

$0
from Inventables

1

Instructions from Woodcraft are good

1 minute

Instructions from Woodcraft are good and can be found linked from this page: https://www.woodcraft.com/products/side-lock-folder-blade-kit-4-1-2-closed-woodriver

Note that you will need a special micro screw driver that is about 1.5mm.

Note that my design does not include a hole that needs to be drilled. By following the instructions, they instruct how to mark the hole once side pieces are dry fit.

I scuffed up my knife while sanding my wood to fit (per the instructions). I will be hitting the stainless steel on the knife with fine steel wool and that should remove all scratches.

JHM
I made one and am now attempting my second. Hoping your template works out better than the one I attempted to make. Woodcrafts isn't even close. I have printed yours out and glued to an 1/8th inch of Zircote wood that I glued to another 1/8 inch matching piece.
JHM
JHM
Any other tips would be greatly appreciated. Thank you for your work.
JHM