Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Wooden Wall Outlet Cover

42 likes
493 opens
252 copies
882 downloads 1 comment
Lawton S

Project by

Lawton S
Alaska

General Information

Whether you are in of a quick and inexpensive wall outlet cover, or looking to add some spice to a wall, this wall outlet cover does just that. Carving takes less than 20 minutes, and it fits any standard US wall outlet.

Like this project Open in Easel®
Material Description Price
Carbide V-Bits

Carbide V-Bits

Cutting Diameter: 1/4 in, Tip Angle: 60 Degree, Shank diameter: 1/8 in

$22.29

Walnut

Walnut

6" × 12" × 1/2" Walnut

This project's Bill of Materials is not complete. Add to Cart

$22.29
from Inventables

File Description Unit Price

Wall_Outlet_Outline.svg

Vector file for use in drawing applications

$0

Download Zip

$0
from Inventables

1

Making the chamfer

2 minutes

The first cut we will make creates the chamfer of the cover. This will be done using the 1/4" 60º V-Bit. It should pass through all but about 1/8" of wood, which will prevent it from being removed until the next step. Once the cut is done, swap the bit for a 1/8" standard wood bit.

2

Carving the Sockets

13 minutes

This second (and last) cut we will make cuts the socket outlines, the screw hole, and at the end the perimeter. Be sure the bit is now 1/8" and it is beginning in the same position. This time, the perimeter cut should go all the way through the material

3

Attaching the cover

5 minutes

Now that you’re wall outlet is carved, we can attach it. Ensure you have switched power off for the outlet before you begin. Remove the current wall cover by unscrewing the flathead screw located between the two outlets, and screw the new cover on.

Christian Gregory
Assuming you don’t need to carve anything off the back for the actual outlet to fit?
Christian Gregory