Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Thanksgiving turkeys

14 likes
141 opens
79 copies
0 comments
Nicholas S Nalbone

Project by

Nicholas S Nalbone

General Information

Designed for nominal 1/4" plywood (actual thickness .22-.23") will fit nicely in the cut out slots with a 1/8" endmill. No changes to the cut settings have been made since your machine, material, hold downs, and bit will dictate that. I recommend either a compression bit or down cut bit.

Like this project Open in Easel®