1 minute
Materials Needed
What you’ll need:
• Hardwood, plywood, HDPE, or any other durable material that is 1/4" thick
• Sand paper
• Finish of your choice
• 8/32 – 3/4" machine screws (longer if you need to carry a stupid amount of keys)
• Split ring
• Washers (if using less than 6 keys)
• Keys
Carving and assembly
Secure material to wasteboard
Carve it
Remove tabs and sand
Add a protective finish
Insert 8/32 – 3/4" machine screw then add 3 keys per side
Secure with nut (if keys are too loose, tighten more and vs versa)
Add middle screw and nut to keep keys from spinning
Add split ring
The youtube video has all of the steps listed above in a more exciting fashion
Link to the easel file if you are having trouble with the attached svg, http://easel.inventables.com/projects/MqJGm-_dVV3BSwfBfIrOMg
If you’d like to 3D print this, https://www.printables.com/model/201169-swiss-army-style-key-organizer
Thomas robin
Nicholas Zastrow
Magali Chemin
Christopher Drake
Paul Burch
Nicholas Zastrow
mark page
Nicholas Zastrow
mark page
L E Behrens
Nicholas Zastrow