Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Studded Trivet

89 likes
1710 opens
471 copies
4 comments
Sam Alaimo

Project by

Sam Alaimo

General Information

Corian is a great material for trivets!

Like this project Open in Easel®
Material Description Price
Black Corian®

Black Corian®

Thickness: 1/2 in, Dimensions: 8 in × 12 in, Cut Tolerance: +/- 1/8 in

$76.54

Add to Cart

$76.54
from Inventables

1

Engrave

30 minutes

This project has one workpiece for engraving with a v-bit, and a second workpiece with the cutout.

Engrave the first workpiece using a v-bit and Easel pro.

2

cut out

5 minutes

Click over to the second workpiece and change the bit to a flat bit.

Then cut out the engraving.

3

Sand

5 minutes

You might need to lightly sand the deep parts of the engraving, then you are good to go!

Brett A DiSario
I am cutting one of these out of MDF just as a sample. It is working great. But I'm finding out ,as it is doing the vertical lines, the machine doesn't have a lot of downward stability as it crosses the horizontal lines.
Brett A DiSario
Brett A DiSario
Did you come across this issue also? Maybe you can change your program to do all of the first step cuts. Then all of the second step cuts. Then the third. It would also cut down on your run time. And possibly make more define cuts
Brett A DiSario
Brett A DiSario
I am planning on making Trivets for a family member for Christmas this year. More of a 3D tree design.
Brett A DiSario
Tim Behm
Can you download a DXF to be used on Easel
Tim Behm