Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Star Wars Sign

9 likes
84 opens
35 copies
244 downloads 4 comments
Ronn trevino

Project by

Ronn trevino

General Information

This is my first completed project on my x-carve. it came out great. I used the single flute bit. It suppose to be good for MDF but made way too much dust. I used my dust collector but still too much in the air. can anyone recommend a better bit? Or would Plywood be a better medium?

Like this project Open in Easel®
Material Description Price
MDF Wood

MDF Wood

Dimensions: 12 in × 24 in, Thickness: 3/4 in

$12.00

$12.00
from Inventables

File Description Unit Price

/uploaded_files/original/missing.png

$0

Download Zip

$0
from Inventables

1

Share Link

https://easel.inventables.com/projects/j84kg4zOruorvZ0C2qwnLw

sorry for the delay on this.. took me long enough to figure out sharing was a link not part of this post page.

2

Sign Build

120 minutes

Hi this is my first upload so please forgive any errors in any part of this process.
This was not publicly shared at first because I was unsure of the copywrite issues this logo may cause.

I printed this out on to 28 in long x 12 in wide board as one whole print but the items are easy to resize so long as you keep the proportions consistent. you can make this as big as you want or as small as your system can cleanly cut.

I then hot glued the items to magnets and placed them on the board.. but you can use any type of spacer you want 1/2 in to 1 in blocks of wood would work well.
please feel free to ask any questions. thank you

Charles Daily
Not publicly shared
Charles Daily
Ronn trevino
I think I resolved the issue.
Ronn trevino
Charles Daily
Still not shared
Charles Daily
Callum MacErlich
please can you share publicly
Callum MacErlich