Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Snowman Tray

72 likes
793 opens
339 copies
1 comment
Rafael Rivera

Project by

Rafael Rivera

General Information

Be free to modify it.

Like this project Open in Easel®
1

Cut Material

4 minutes

Cut your favorite piece of wood at 6.5" L x 10" W x .75" thick.

2

Clamp

2 minutes

Hold down your material.

3

Start Carving

Adjust your tray depth if needed.

I used a 5 flutes 1/4" endmill.

Custom Rates:
- 100 in/min Feed Rate
- 40 in/min Plunge Rate
- 0.125 in/min Depth Per Pass

4

Paint/Finish

20 minutes

Pain or Stain it. I used acrylic water based paint.

5

Clear Coat

30 minutes

I gave two Gloss Clear coat.

Arjay Henshall
Can you tell me more about what bit you used please? id love to give this project a go for make for my niece this year
Arjay Henshall