open in easel and make sure all your settings are correct
Easel setup:
When you open this in easel please make sure and check all your settings as mine may not work for you
Saftey Height: .150"
Step over: 50%
Feedrate: 45 in/min
Depth of cut per pass: .0625
Depth of total cut: .050"
material thickness: .25"
Material type: Birch Plywood
Bit Size: .125"
Bit Type: solid carbide 2 Flute straight flat end mill
I hope you enjoy this simple project if you have any questions just let me know