Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Remake (Minor Fixes) OF MWP Dust guards

4 likes
0 opens
0 copies
498 downloads 1 comment
WorkinWoods

Project by

WorkinWoods

General Information

Hello this is a remake of MWP Dust shields he gets all the credit for the original design
What I did:
I added a spacer block for the dust shield ends along with extra holes in the actual dust shield for mounting purposes

Please follow all his instructions I just want to share my files

Like this project Open in Easel®
Material Description Price
Aluminum Sheet 6061

Aluminum Sheet 6061

Dimensions: 12 in × 12 in × .125 in, Thickness: .125 in

Silver Mirrored Acrylic Sheet

Silver Mirrored Acrylic Sheet

Dimensions: 12 in × 24 in, Thickness: 1/8 in

$21.60

This project's Bill of Materials is not complete.

$21.60
from Inventables

File Description Unit Price

/uploaded_files/original/missing.png

$0

Download Zip

$0
from Inventables

1

Cut the main dust shield pieces

60 minutes

So please follow all MWP instructions but you need to cut 4 of these pieces out all I did was add some additional holes to them to better secure them to the markerslide

I used :

2 flute solid carbide spiral downcut .125 bit

2

Cut little spacer blocks

60 minutes

So please follow all MWP instructions but you need to cut 4 of these pieces out these will allow you to have the proper spacing from the makerslide when using the additional holes in the main dust shield

I used :

2 flute solid carbide spiral downcut .125 bit

Robert Rieke
Nice addition to my project, I'll be sure to link to this. Thanks for the upgrade!
Robert Rieke