Fernando Romero
Houston, USA
Plywood red stone lamp.
11.5" x11.5″ × 11.5″.
| Material | Description | Price | ||
|---|---|---|---|---|
|
Birch Plywood (×3) |
Thickness: 1/2 in, Dimensions: 12 in × 24 in |
||
|
Clear Acrylic Sheet - Cast (×3) |
Dimensions: 12 in × 24 in, Thickness: 1/8 in, Material Type: Extruded |
$31.02 |
|
| This project's Bill of Materials is not complete. Add to Cart |
$31.02 |
|||
200 minutes
Cut 11.5″ × 11.5″ squares out of 3/8" or 1/2" plywood.
Cut 45º chamfer around edge of the square.
Mill holes on side panels (qty. 4)
Mill holes on special panel for light switch.
200 minutes
Glue five panels together to form a cube. (exclude the bottom panel, which will be fastened with screws)
Use reinforcing wood blocks on interior to add rigidity to the cube sides.
Cut five polycarbonate (lexan) windows.
Glue red and then yellow tissue paper over exterior side of lexan windows.
Finish of paint five sided cube and bottom panel with back paint or stain.
Fasten lexan panels to interior of cube.
Attach light fixture with dimmable LED bulb.
Connect light switch (dimmer)
Fasten bottom panel with screws.
Derek D
Fernando Romero
Cyrus Rich
Zach or Sarah Harner