Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Plywood Bed Table

39 likes
221 opens
112 copies
2 comments
Antonio Hernandez Menchaca

Project by

Antonio Hernandez Menchaca
Mexico City, Mexico

General Information

I bet you wish you could have breakfast in bed from time to time, all you’d need to do is buy a table.. or you could just make your own. With this simple 3 piece design, you can have breakfast in bed, take it apart and store it easily.

Like this project Open in Easel®
1

Material

5 minutes

For this project we’re going to need the following material:
- (2) 24 × 13 inch pieces of 3/8 inch thick plywood.
- 150 grit sandpaper
- Finish of choice

2

Carving

44 minutes

Fasten your pieces on your X-carve and start carving.

3

Sanding

10 minutes

With your 150 grit sand paper sand the edges and give them a slight chamfer.

4

Finish

5 minutes

In this case I’d use food-grade polyurethane, but feel free to use your finish of choice.

Matt Lundy
This looks perfect for a Christmas gift I had in mind! I can't seem to find the file for the legs?
Matt Lundy
ANGELA WARNER
No legs
ANGELA WARNER