Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Picture Frame

42 likes
522 opens
163 copies
5 comments
john Tansley

Project by

john Tansley
Greece

General Information

Picture frame with finger joints. the joint was surprisingly strong and didn’t need any additional reinforcing.

Like this project Open in Easel®
1

Video

60 minutes

here is a video of how i made the frame there isn’t much to it but it works well.

Daniel Harasim
Can you send link to the router bit used ?
Daniel Harasim
john Tansley
Hi Daniel i get most of my bits for my CNC from sorotec.de in germany this is the actual bit i used https://www.sorotec.de/shop/Cutting-Tools/sorotec-tools/1-8-tools/1-8--Shaft-Mill-Tools/Special-Lengths-360/2-Flute-365/
john Tansley
john Tansley
and i used one of these cheap rabbeting bit of ebay https://www.ebay.co.uk/sch/sis.html?_nkw=1%2F4+Inch+Shank+Rabbeting+Router+Bit+with+6+Bearings+Set+for+Multiple+Depths+M5J7&_id=254319018790&&_trksid=p2057872.m2749.l2658
john Tansley
Andrew morrison
What size would you make this to fit a 4x6 photo?
Andrew morrison
john Tansley
Hi Andrew, the opening in the middle would have to be a bit smaller than 4x6. so you would need to adjust the design to your needs.
john Tansley