5 minutes
For this project you will need to following materials:
- 12 × 12 inch 3/8 inch Bamboo Plywood
- 8 × 8 inch 1/4 inch Clear Acrylic Sheet
- (12) 4 mm wide 2 mm deep rare earth magnets
- 150 grit sandpaper
5 minutes
If you have a router with a roundover bit, rounder over the edges with curves on the bottom side of the plates.
5 minutes
Sand all the edges down with your sandpaper until they’re nice and smooth.
5 minutes
Dip the bamboo plywood in mineral oil for a food safe finish.