Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Night Light Duo

10 likes
13 opens
1 copy
463 downloads 0 comments
Teams  Design

Project by

Teams Design

General Information

These friendly creatures will help you feel safe at night.

Like this project Open in Easel®
Material Description Price
Bamboo Plywood

Bamboo Plywood

Thickness: 3/4 in - don't use, Plies: 3 - don't use 1, Dimensions: 8 in × 12 in - don't use 1

Hi-Lo Screw

Hi-Lo Screw

Thread Size: #10-26, Length: 1.00 in, Finish: Zinc Plated, Quantity: 10

Red on Bright White Laserable Acrylic Sheet

Red on Bright White Laserable Acrylic Sheet

Dimensions: 8 in × 12 in, Thickness: 1/8 in, Thickness Tolerance: ± .005 in

$16.49

This project's Bill of Materials is not complete.

$16.49
from Inventables

File Description Unit Price

NightLight_Frame_rev2.svg

$0

NightLight_Cap_rev2.svg

$0

Download Zip

$0
from Inventables

1

Purchase USB cable and LED light

You will need these parts in addition to the materials from Inventables to complete this project.

USB Cable

LED Light

2

Cut out the Frame

Load this Easel link to cut out the Frame using an 1/8" bit.

3

Cut out the Cap

Load this Easel link to cut out the Cap using a 1/16" bit.

Tip: You can use materials of various thickness for this part as long as you adjust the thickness in the Easel file. So feel free to experiment!

4

Remove the parts

Separate the parts, and sand them down as needed.

5

Assemble the Frame

Insert the USB cord in the slot and assemble the frame.

6

Snap the Cap in

Depending on the tolerance, the Frame should hold the Cap in by friction. If not, you can use adhesive.

7

Plug it in

Insert the LED light in the USB port, and plug the other end of the cable in your spare phone charger.

Tip: You can make a paper cut out to cover the hole in the back for a more even diffusing of the light.