Get all the marbles to the middle. This game is surprisingly harder than it looks! The slick design makes in a nice addition to a home or office.
15 minutes
Open the project and carve the Workpiece labeled “wood base”. Any 1/2 wood or material should work.
5 minutes
Next, go to the Workpiece labeled “acrylic cover”. Cut this out of any 1/16" thick acrylic.
1 minute
I used 5/32 inch Diameter Chrome Steel Bearing Balls for the balls in this game.
1 minute
I was able to press fit the acrylic into the wood (I used the inlay app to get the measurements right). I didn’t use any glue, and the top stays in nicely unless you bang in upside down on a table.
You can glue it if you would like!
Steve Kinnaird