Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Laser Cut Snowflake Ornaments

Astrida Valigorsky

Project by

Astrida Valigorsky

General Information

A couple of great snowflake ornaments made from Radiant Acrylic! These look amazing on a tree or any dark background. Made with an Epilog 35 Watt lasercutter, however it would be possible to make them with a shapeoko.
Files to make this project are available here for non-commercial use.

Like this project
Material Description Price
Radiant Acrylic

Radiant Acrylic

Dimensions: 8 in × 12 in, Thickness: 1/8 in

File Description Unit Price

Astrida_flakes.eps

EPS File

$0

Astrida_flakes.dxf

DXF File

$0

Astrida_flakes.pdf

PDF File

$0

Download Zip

$0
from Inventables

1

1. Do you have a lasercutter? Or a shapeoko?

Note what the device type you’re going to cut this on IS.

2

2. Obtain the proper file for your device from the Author

Files are posted here, but if you need something a little different for the machine you’ll cut things on, you’re welcome to email the author for modifications.

3

3. Make Your Cuts

The file size of the document sent is based on the smallest size material here (8×12 plexi). There are 8 snowflakes of varying sizes in the file. You may need to modify it before you make your cuts if you have more material.

4

4. Hang your Ornaments

The design of the ornaments has small holes to thread wire or nylon thread hangers through it.