Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Interlocking Shelf/Console

2 likes
18 opens
5 copies
0 comments

General Information

A TV Shelf/Console type design. Cut on the X-Carve Pro out 1 4×8 Cherry Plywood sheet.

Like this project Open in Easel®
1

Materials

I used a straight 1/8" bit and 3/4" plywood. The slots are designed to fit .70" thick material.

After cutting, I sanded off the tabs and edges. Assembled before painting to ensure fit.

Used primer for painting but still needed a couple coats. I used test sample paint jars to save $ on paint.

After painting, the fit was snug so you may need to sand the slotted edges.