Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Halloween Sleepy Hollow Sign

John Holinka

Project by

John Holinka
Austin, USA

General Information

Halloween Sleepy Hollow Sign

Three G-code files to make a Sleepy Halloween Tavern and Inn sign.

Part 1 – V-bit of text
Part 2 – Sign shape with 1/8 straight bit
Part 3 – Headless horseman image with 1/16 fishtail bit

Like this project
Material Description Price
Suction Cup Tape

Suction Cup Tape

Color: White, Form: Sheet, Dimensions: 210 mm × 297 mm × 0.50 mm

$15.99

$15.99
from Inventables

File Description Unit Price

Sleepy_Hollow_Sign_125_mill_part2.nc

1_16th bit Headless horseman

$0

Sleepy_Hollow_Sign_125_mill.nc

1_8th bit Sign Cutout

$0

Sleep_Hollow_Sign_Vcarve.nc

90 degree bit Sign Text

$0

Download Zip

$0
from Inventables

1

Sign making instructions

60 minutes

Set up for .57 inch material. (Cedar fence pickets)

Used 2 6-inch wide by 8-feet long cedar fence pickets.

Cut into four 20-inch pieces.

Joint edges on table saw or hand plane. Or simply glue together roughly.

After glue dries clamp or tape down panel in Xcarve and run each of three files.

If material is too thick cut off remaining to coping saw, band saw or other means and sand flat edges.

Paint or finish as desired.