Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Gameboy Cartridge

4 likes
71 opens
31 copies
0 comments
Ip Khera

Project by

Ip Khera

General Information

This was created using my X Carve with 15 degree V Bit and a 1/8 Upcut Bit

Like this project Open in Easel®
1

Gameboy Cartridge

This was done on 1/4 Scrap Hardwood 3 1/2 by 3 1/2

It is cut using a 1/8 in upcut mill for Rough Cut

Then went in with 15 Degree V Cut Bit for details

Once all that is done go to layer 2 and use a 1/4 Mill to cut it out don’t Re Zero XY use same XY as before