Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Elephant Wall Trophy

22 likes
183 opens
66 copies
5 comments
Andrew Petzold

Project by

Andrew Petzold

General Information

This is a cool project if someone makes it please show me pictures. I am going to try to make it aswell.

1. 1/4 inch bit
2. material 1/4 thick
3. you might need to adjust some of the settings

Like this project Open in Easel®
1

How to cut out this head

When you open the project you will notice there are a few pages of cut files. To navigate to the different cut files you’ll need to click the pages at the bottom of the screen to open the next cut.

Lance Fenner
Is there an easy way to change this file to match .475" material?
Lance Fenner
Andrew Petzold
Lance -> you can scale up the project by taking the thickness you want the project to be lets call that T divided by the current thickness lets call the CT and time that by the current width lets call that CW.
Andrew Petzold
Andrew Petzold
this will get you the new width to scale the project too. T / CT * CW = new width 8/10/2020
Andrew Petzold
Lance Fenner
Thanks Andrew! I tried to increese the scale factor by two to make the slot thickness .475" but it made the ear sections so large that it would no longer fit my CNC. :( I'll keep playing with it. Thanks for the help and the cool file!!!!
Lance Fenner
Anthony Hollinger
i open it up and dont see any extra pages at the bottom how would i go about finding them. sorry very new to all this
Anthony Hollinger