Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

DIY Corian + Walnut Trivets

6 likes
68 opens
15 copies
0 comments
Amanda Lynn Hendrix

Project by

Amanda Lynn Hendrix

General Information

These cute corian and walnut trivets are easy to make and are sure to make you smile the next time you’re serving up a big dinner!

Like this project Open in Easel®
Material Description Price
Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Quantity: 1, Shank Diameter: 1/8 in, Cutting Diameter: 1/8 in

$5.99

Carbide Tip V-Bit 90 Degree - 1/4 in Cutting x 1/8 in Shank

Carbide Tip V-Bit 90 Degree - 1/4 in Cutting x 1/8 in Shank

Cutting Diameter: 1/4 in, Tip Angle: 90 Degree, Shank diameter: 1/8 in

$21.40

Walnut

Walnut (×2)

6" × 12" × 1/2" Walnut

$21.72

White Corian®

White Corian®

Thickness: 1/2 in, Dimensions: 8 in × 12 in, Cut Tolerance: +/- 1/8 in

This project's Bill of Materials is not complete.

$49.11
from Inventables

1

Carved Wood Trivet

- Use 90-degree V-Bit to cut pattern in wood
- Use 1/8" straight-end bit to cut circle
- Lightly sand, and add mineral oil

2

Corian + Walnut Stripes

- Cut 1" pieces of corian and walnut (I used a miter saw)
- Glue into stripes using silicone adhesive
- Once dry, use 1/8" straight-end bit to cut out circle.
- NOTE: You could adjust the shape to any shape you like, or carve into this one as well!
- Sand and add mineral oil

3

Carved Corian + Walnut

- Carve geometric pattern into corian
- Cut out corian strip using miter saw (if carving into a larger piece of corian)
- Glue between two equally-sized pieces of walnut using silicone adhesive
- Once dry, sand and add mineral oil.
- NOTE: You could also cut this one into a circle, if preferred