COVID-19 Protective Visor
Project by
Kevin Loeffler
General Information
DIY personal protective equipment derived from the design by Erik Cederberg / 3DVerkstan from Faceshield.nu
Designed to let you attach a plastic sheet (such as a letter-sized report cover) to make a quick, cheap, and easy protective mask in response to the COVID-19 pandemic.
Open in Easel®
Carve Design
On my Carvey with a 1/16" bit this took 11 minutes.
Estimated time: 11 minutes
Use a hole punch to make holes for a letter-sized plastic sheet
I used a dry erase marker to mark the spots on a plastic report cover where I should use a hole punch to make holes for the rectangular grips to push through on the visor.
Estimated time: 3 minutes
Press plastic sheet onto grips
Press the plastic sheet onto each of the rectangular grips, forcing them through the holes created with your hole punch.
Estimated time: 2 minutes
Great project for save lives
Luis Taveras
Hi. Exactly which bit did you use?
Tommy Klausen
I used a 1/8" upcut bit to cut these. I did one with a 1/16" and found the visor to be quite brittle.
Kevin Loeffler
What material did you use? I looked in Easel and it shows MDF. I am considering using expanded PVC.
PAUL BESSER
I used MDF, but I'm sure expanded PVC would work great! I've also made a few out of plywood, which seems to work nicely as well.
Kevin Loeffler
where did you get the head band at?
Daniel Harasim
I work in a thermoplastic sheet factory and can provide [PET sheet](https://desuplastic.com/pet-sheet/), PS sheet, PP sheet and other thermoforming sheets, if you are interested. https://desuplastic.com/
pulixin3@gmail.com