1 minute
Plywood – 4 mm (remember to measure the wood thickness, my plywood ended up being 4.2 mm!)
Sanding paper.
5 minutes
Secure the plywood to the waste-board.
Carve the two pieces.
Unfasten the clamp and remove pieces.
Sand the edges and tabs gently.
Assemble by slotting the two pieces together. The fit ought to be loose, as there needs to be some play for the stand to lean backwards. The groove-slots can be carved more narrow if you would like the stand to be more upright.
30 minutes
If you would like to jazz the build up a bit – you can use the following link:
http://easel.inventables.com/projects/rldc_LrP0wCXlscpptwV2A
Bill Holland