Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Coasters!

The Guru

Project by

The Guru

General Information

Myriad of coasters

Like this project
Material Description Price
Two-Color HDPE - Black on Yellow

Two-Color HDPE - Black on Yellow

Thickness: 1/4 in, Dimensions: 12 in × 12 in, Quantity: 1

Two-Color HDPE - White on Black

Two-Color HDPE - White on Black

Thickness: 1/4 inch, Dimensions: 8 in × 12 in

$7.17

Two-Color HDPE - White on Blue

Two-Color HDPE - White on Blue

Thickness: 1/4 in, Dimensions: 12 in × 12 in, Quantity: 1

$9.71

Two-Color HDPE - White on Red

Two-Color HDPE - White on Red

Thickness: 1/4 in, Dimensions: 12 in × 12 in, Quantity: 1

$9.97

This project's Bill of Materials is not complete.

$26.85
from Inventables

Drew WiFi
What did you use to engrave these?
Drew WiFi
The Guru
Hi Drew - it varies based on design. Generally I used either a standard 2 flute 1/8" down cut or a 0 degree 2 flute straight cut bit. All are about 25-30in/min and a spindle speed of 1-2 for the Makita; I would think the Dewalt will be the same. Hope that helps.
The Guru