Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

CC Glue Caddy

13 likes
21 opens
15 copies
0 comments
Keith Rutherford

Project by

Keith Rutherford
El Paso, Texas

General Information

Do your glue bottles tip over? This project will organize your 2 oz. Starbond glue bottles, tips and accessories. This simple two stage carve is a useful addition to any shop.

Like this project Open in Easel®
Material Description Price
Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Quantity: 1, Shank Diameter: 1/8 in, Cutting Diameter: 1/8 in

$5.99

Carbide Tip V-Bit 90 Degree - 1/4 in Cutting x 1/8 in Shank

Carbide Tip V-Bit 90 Degree - 1/4 in Cutting x 1/8 in Shank

Cutting Diameter: 1/4 in, Tip Angle: 90 Degree, Shank diameter: 1/8 in

$21.40

Cherry Wood

Cherry Wood

6" × 12" × 3/4" Cherry Wood

$10.86

$38.25
from Inventables

1

Secure and carve workpiece

45 minutes

I used the glue and tape method to secure the work piece to the spoil board. This is a simple two bit carve and you can do the V-bit first or second, it really shouldn’t make any difference. Sand the finished carve and finish with your favorite clear finish. I use Polycrylic spray because that is what I had available. After two coats of clear, I used a paper towel to rub black acrylic paint in the lettering. Two more coats of clear after the black acrylic left a satiny clear and smooth finish.