Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Cable Stay

28 likes
121 opens
22 copies
654 downloads 0 comments
Beyond Design

Project by

Beyond Design
Chicago, Illinois

General Information

A simple puck to help with cable management. Holds your charger cable to keep it from falling off your desk or nightstand.

Like this project Open in Easel®
Material Description Price
31% Light Transmission White Acrylic Sheet

31% Light Transmission White Acrylic Sheet

Dimensions: 8 in × 12 in, Thickness: 1/8 in

$7.49

Black HDPE Sheet

Black HDPE Sheet

Thickness: 1/2 in don't use, Dimensions: 8 in × 12 in don't use

This project's Bill of Materials is not complete. Add to Cart

$7.49
from Inventables

File Description Unit Price

Cable Holder.ai

$0

Download Zip

$0
from Inventables

1

Mill Pattern for top face

Use a ballnose endmill to mill a pattern in the top face of the cable stay. If making several at once you can fill the entire face of the material with a pattern.

Use this EASEL link

2

Flip material

Flip the material over and clamp down. As long as you are using an oversized pattern the alignment doesn’t need to be perfect.

Use double sided tape to secure material for the next cut.

3

Mill bottom face

Use a 1/8" square or fishtail endmill to cut the cable path and other details into the bottom of the puck.

Use this EASEL link

4

Mill acrylic plate

Cut the plate to trap the cable out of an acrylic material. Due to the small part size this is also a good time to use double sided tape.

Use this EASEL link

5

Assembly

The design has recessed circles that are meant for rubber feet. These will help keep it in place. You can find a wide variety of 1/2" adhesive back bumpers from McMasterCarr