Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Banana Tree

4 likes
41 opens
17 copies
0 comments
Jason Gazzana

Project by

Jason Gazzana
Neenah, WI

General Information

A decorative stand to place your bundle of bananas. It features a palm tree stand with the capability of hanging (2) bundles of bananas!

Like this project Open in Easel®
Material Description Price
Birch Plywood

Birch Plywood

Thickness: 1/2 in, Dimensions: 12 in × 24 in

Gorilla Wood Glue

Gorilla Wood Glue

Gorilla Wood Glue - 4 oz

1

Modify Design to Material Thickness

1 minute

You’ll want to adjust the slot thickness on the base to fit the exact width of material you are using, this will ensure a snug fit when you go to assemble.

2

Assemble

20 minutes

Apply glue to the tab of the tree. Fit the the tab on the palm tree piece to the slot on the base. Wait till glue is dry.

3

Add Hooks

5 minutes

Drill pilot holes to both sides of the palm tree, approx. 10-11" from the base. Purchase 1 1/4" Hooks from your local hardware store and apply to the palm tree. Be sure the threads do not protrude the opposite side.

4

Finish

30 minutes

Apply paint/finish however you want!