to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
to make commercial use of the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
The author’s moral rights;
Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Download both the files. I generated the tool paths in Makercam. The instructions are in the video below. You can also use other CAM programs to generate your tool paths.
2
Cut and Secure Material
My Shapeoko set up uses the “hold down table” project. You can also screw the material into the waste board with wood screws.
3
Home the spindle
Jog or manually bring the spindle to the appropriate origin point. The file is set up with the origin in the lower left corner of your material.
4
Run the Gcode
I used Universal G code sender. There are several free g code programs recommended at shapeoko.com/forum. Once your Shapeoko is connected, zero your axis and upload the file. your file should be ready to run!
5
Finishing
I used an 1/8 in chisel and rubber mallet, to knock the tabs off of my piece. Then I lightly sanded the edges with 220 sand paper.
We use cookies to personalize content, interact with our analytics companies, advertising networks and cooperatives, and demographic companies, provide social media features, and to analyze our traffic. Our social media, advertising and analytics partners may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. Learn more.