Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Alpha Sigma Phi CNC+3D

Charles Modrich

Project by

Charles Modrich

General Information

The machine is basically the Shapoko kit with added extruder and heatbed to create a 2-in-1 additive and subtractive rapid prototyper.

Like this project
Material Description Price
Aluminum GT2 Pulley - 20 Teeth, Dual Flange - 20 mm Pitch

Aluminum GT2 Pulley - 20 Teeth, Dual Flange - 20 mm Pitch (×3)

Bore: 5 mm - 2013 - 2019, Belt Width: 6 mm

Black Expandable Sleeving

Black Expandable Sleeving (×10)

Type: Expandable Sleeving, Color: Black, Range: 1/4 in - 3/4 in, Size: 1/2 in

$19.90

Desktop 3D Carving (CNC Mill) Kit - Shapeoko 2

Desktop 3D Carving (CNC Mill) Kit - Shapeoko 2

Mechanical kit (requires you provide electronics, pulleys, belts, and M3 hardware to function)

$300.00

DeWalt DW660 Spindle Mount

DeWalt DW660 Spindle Mount

New Property: Spindle Mount, Type: Spindle Mount

E-Stop Button

E-Stop Button

Type: Latching pushbutton

End Mill Sample Pack, 1/8 in Shank

End Mill Sample Pack, 1/8 in Shank

Quantity: 5 (mix of 3 different types), Shank Diameter: 1/8 in, Cutting Diameter: 1/8 in

Flat Washer

Flat Washer (×2)

Finish: Zinc Plated, Dimensions: I.D: 3.2mm; O.D: 7mm, Quantity: 10

$4.00

GT2 Belting - Open Ended - 4 Meters

GT2 Belting - Open Ended - 4 Meters (×6)

Width: 6.35mm - don't use, Pitch: 2mm - don't use

Hex Nuts

Hex Nuts

Height: 2.4mm, Pitch: 0.5mm, Quantity: 10, Width: 5.5mm, Thread Width: M3

Knurled Aluminum Knob

Knurled Aluminum Knob

With crank

Microswitch

Microswitch (×3)

Type: Microswitch

$7.50

Silver PLA 3D Printer Filament

Silver PLA 3D Printer Filament

Type: Filament, Diameter: 1.75 mm, Material: PLA, Color: Silver, Shade: Silver, Spool Weight: 1 kg, 3D Printer Compatibility: RepRap

Socket Head Cap Screw - Packs of 10 each

Socket Head Cap Screw - Packs of 10 each (×2)

Length: 8mm - 2012 - 2019, Quantity: 10, Thread Size: M3

Socket Head Cap Screw - Packs of 10 each

Socket Head Cap Screw - Packs of 10 each

Length: 12mm - 2012 - 2018, Quantity: 10, Thread Size: M3

Stepper Motor - NEMA 17

Stepper Motor - NEMA 17 (×4)

Lead Time: In stock, Holding Torque: 62 oz/in

Stepper Motor Cable

Stepper Motor Cable (×15)

Length: 1 ft, Category: Accessory, Type: Cable

Tamiya Power Connectors

Tamiya Power Connectors (×3)

Type: Power Conector, Material: Nylon, natural color

Terminal Block

Terminal Block (×4)

Positions: Terminal Block 4

$19.96

Waste Board with Threaded Inserts

Waste Board with Threaded Inserts

Size (approx): 500mm 500mm 1/2" MDF, Inserts: M5 Qty 36

This project's Bill of Materials is not complete.

$351.36
from Inventables

File Description Unit Price

ASPCNC3D-Slic3rSettings.ini

These are the slicing settings that I use that seem to give the best results.

$0

ASP CNC Bill of Materials - Sheet1.csv

True bill of materials for this project including parts sourced from outside of Inventables

$0

Download Zip

$0
from Inventables

Randy Buster
Charles - I am about to kick off a project much like what you have done. Are you willing to discuss what logic boards you are using and what it takes to switch from CNC to 3D??
Randy Buster
Charles Modrich
Of course, the electronics I used was an arduino mega 2560 with a Ramps 1.4 electronics board. These should be reflected in the bill of materials document (.csv) under the digital files section. If you have any other questions feel free to ask!
Charles Modrich
Gregg Harrington
Did you build your own extruder or buy a turn key design?
Gregg Harrington
Charles Modrich
This is the Extruder that I used: http://tinyurl.com/nbpmznf Would not recommend that one again though, it clogs way too much for my liking. I did have to make my own fan setup though, I created a fan shroud to attach a dc cooling fan aimed at the print surface.
Charles Modrich