Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Air Plant Holder #1

11 likes
59 opens
13 copies
605 downloads 2 comments
Teams  Design

Project by

Teams Design

General Information

A lightweight acrylic frame for hanging small air plants. Eclectic ventilation and translucent materials allow full sunlight and easy access. Mix and match colors and designs for a stunning window collection.

Like this project Open in Easel®
Material Description Price
Cherry Blossom Acrylic Sheet

Cherry Blossom Acrylic Sheet

Dimensions: 8 in × 12 in, Thickness: 1/8 in

$11.49

Clear Acrylic Sheet - Cast

Clear Acrylic Sheet - Cast

Dimensions: 8 in × 12 in, Thickness: 1/8 in, Material Type: Cast

$5.99

$17.48
from Inventables

File Description Unit Price

AirplantHolder_#1.svg

SVG File

$0

CarveyAirplant_directions.pdf

Step by step instructions

$0

Download Zip

$0
from Inventables

1

Mill Part

Clamp and secure material. Run the program with a 1/16th bit.

For the EASEL carving program you can use this Link

2

Cut out material

Using a small hand saw cut through the tabs on the sides of the design.

3

Bend

Using a heat gun slowly heat and bend the joints of the holder. The joints will heat up faster than the body of the piece and should be easy to move.

4

Thread and Tie

Using hanging material of choice, make a knot to anchor and thread strand through the bottom. Use several smaller pieces to fasten.

Featured here:
1/4th inch brown leather
Geometric metal bead
Noose-head tie

For more detailed instructions check out the pdf :)

Theo Retos
This project is awesome. The Easel link you posted isn't a public project. Would you mind sharing it again? Thanks!
Theo Retos
Sarah Vanderheyden
I'd love to try this project! What settings were used for the Feed Rate, Plunge Rate, and Depth per Pass?
Sarah Vanderheyden